Wave Speed, Frequency and Wavelength
fx-50FH II · COMP · 127 bytes
Find one missing wavelength, frequency or wave speed from v=fλ.
- 127 bytes
- COMP mode
Worked examples
Example 1
Original practice: a ripple generator in a laboratory tray has period 0.08 s. Adjacent wavefronts are 0.036 m apart. The frequency and wavelength stay constant. Find the propagation speed in m/s.
Answer
Standard solution (without a calculator)
- Adjacent wavefronts are separated by one wavelength. The source period gives the reciprocal frequency.
- f=1/T=1/0.08=12.5 Hz; λ=0.036 m.
- v=fλ=12.5×0.036=0.45 m/s.
- vT=0.45×0.08=0.036 m=λ.
- In 0.08 s the disturbance advances 0.036 m, confirming the speed and its unit.
Example 2
Original practice: in a flexible classroom waveguide, a wave packet travels 2.16 m between sensors in 0.12 s. Its periodic carrier has wavelength 0.45 m and the same propagation speed. Find the carrier frequency.
Answer
Standard solution (without a calculator)
- First obtain the speed from the measured travel distance and elapsed time. Use the carrier wavelength, not the sensor separation, in v=fλ.
- v=2.16/0.12=18 m/s.
- f=v/λ=18/0.45=40 Hz.
- T=1/40=0.025 s; vT=18×0.025=0.45 m.
- At the calculated frequency, each cycle lasts 0.025 s and the wave travels 0.45 m in one cycle.
Example 3
Original practice: an underwater mapping source produces 2500 complete ultrasonic cycles in 0.02 s. Sound travels at 1500 m/s in the water. Find the wavelength in metres and the period in seconds.
Answer
Standard solution (without a calculator)
- Count complete cycles to obtain the frequency; the elapsed time is not the period of one cycle.
- f=N/Δt=2500/0.02=125000 Hz.
- λ=v/f=1500/125000=0.012 m.
- T=1/f=0.000008 s; vT=1500×0.000008=0.012 m.
- The solver returns the wavelength only. Calculate the period separately from T=1/f and check vT=λ.
When to use it
Find one missing wavelength, frequency or wave speed from v=fλ.
Input order
- A=λ, B=f, C=v. Leave exactly one field blank with EXE; type a positive real value in each other field.
- Enter all known values again on every run. A blank EXE marks the one unknown.
Results
- The single result belongs to the field left blank. −1 is an error marker: press EXE to restart at A?, or AC to leave.
Conditions and limits
- Use COMP, Norm 1 and an empty P1 with 127 bytes available. The images use Deg; angle units do not affect these calculations. Wavelength and speed must use the same length unit; frequency is in Hz.
- For period T, enter 1/T in B. For N complete cycles in elapsed time Δt, enter N/Δt. The program does not read a graph or output the period automatically.
- Known values must be strictly positive. Never enter −1 as known data: it is indistinguishable from the blank preset. A, B, C, X and Ans are overwritten. Extreme products, tiny values and cancellation are limited by calculator precision and range.
Checking access…