Rounding to a Given Place
Rounding to a Given Place
Round a number to any place: decimal places, significant figures or the nearest whole number.
- 19 bytes
- COMP mode
Worked examples
Example 1
A science club weighs a powder on an electronic balance and gets an unrounded reading of 0.037485 kg. The record sheet needs the mass to 4 significant figures. Which value should be written? (All options are in kg.)
Answer
Standard solution (without a calculator)
- Locate: leading zeros are not significant. The first four significant digits are 3, 7, 4, 8, and the fourth is in the 5th decimal place, so q = 0.00001.
- Round: the next digit is 5, so round up: 0.037485 to 4 significant figures is 0.03749.
- Check with place value: 0.037485 ÷ 0.00001 = 3748.5 → 3749 → × 0.00001 = 0.03749 kg. Its significant digits are 3, 7, 4, 9 — four of them.
- Choose: B. 0.0375 has only 3 significant figures, and 0.037485 is the reading before rounding.
In grams the reading is 37.485 and q becomes 0.01: 37.49 g, the same as 0.03749 kg.
Example 2
A model-making group measures a wooden strip as 8.246 cm. The record must give the length to 2 decimal places. What length should be recorded, in cm?
Answer
Standard solution (without a calculator)
- Step size: 2 decimal places means the hundredths, so q = 0.01.
- Next digit: the third decimal digit is 6, so the second goes from 4 to 5: 8.25 cm.
- Check with place value: 8.246 ÷ 0.01 = 824.6 → 825 → × 0.01 = 8.25 cm. 8.2 has only one decimal place, and 8.24 ignores the 6.
- Choose: A. Decimal places are counted from the decimal point, unlike significant figures.
To 2 significant figures instead, the last kept digit is the tenths: q = 0.1 and the answer is 8.2 cm.
Example 3
A sports watch shows a distance of 9.995 km. The activity report needs the distance to 3 significant figures, written to that accuracy. Which is correct? (All options are in km.)
Answer
Standard solution (without a calculator)
- Locate on the original number: the 3rd significant digit of 9.995 is in the hundredths, so q = 0.01. Do not choose q again after carrying.
- Carry: the 4th significant digit is 5, so 9.99 carries up to the value 10.
- Check with place value: 9.995 ÷ 0.01 = 999.5 → 1000 → × 0.01 = 10.
- Write the accuracy: 10 to 3 significant figures is written 10.0 km, so the answer is D. 10.00 would show 4 significant figures; the calculator’s scientific display does not replace the required form.
Likewise, 9.949 to 3 significant figures also uses q = 0.01 from the original number and gives 9.95.
When to use it
Many DSE answers end with “correct to 3 significant figures” or “to 2 decimal places”. 001 needs only two numbers: the original number A and the place value q of the last digit to keep. Decimal places, significant figures and the nearest whole number are all turned into q first, then rounded by one formula.
What it is for
- Rounding an answer to d decimal places, s significant figures or the nearest whole number
- Numbers with leading zeros (0.037485) and carries across 10 (9.995 → 10.0)
- The last step of a longer calculation (interest, trigonometry, statistics)
What you enter
- A: the original number, not yet rounded (positive, negative or 0)
- B: the place value q of the last kept digit (2 decimal places → 0.01; 4 significant figures of 0.037485 → 0.00001)
- q is a place value, not the number of digits
What it shows
- One result, the rounded value, with 10 digits (Sci 0): 3.749000000E-02 = 0.03749
- No pauses on the way
- Write the answer with the trailing zeros the question needs (10.0 for 3 significant figures)
Check before use
- Find the last digit to keep on paper first, then enter its place value q. q is positive, it is not the number of digits, and A and q use the same unit; for significant figures q depends on the size of the original number.
- A may be positive, negative or 0. Exact halves round away from zero: −1.235 to 2 decimal places gives −1.24. For A = 0, choose q from the accuracy the question gives.
- The screen uses Sci 0 (10 digits): 3.749000000E−02 is 0.03749. The padding zeros are not extra significant figures; write the trailing zeros the question needs yourself (3 significant figures → 10.0).
- The screen holds at most 10 significant digits, so a longer answer cannot be copied from it. Checked for 0–9 decimal places, 1–9 significant figures and the nearest whole number.
- Avoid numbers near the calculator’s limits, keep enough digits during the working and round only at the last step. A number that differs from a rounding midpoint only in its 13th–15th significant digit needs an exact check.
- q = 0 gives Math ERROR (division by 0); press AC and check q. This short version has no menu and does not count significant figures for you.
- It shows one result with no pauses. Press AC to leave; EXE runs it again. Sci 0 stays on afterwards: SHIFT MODE Right 3 1 returns to Norm 1.
Checking access…