Perimeter bounds and percentage error
Perimeter bounds and percentage error
Perimeter bounds and percentage error
- 98 bytes
- COMP mode
Worked examples
Example 1
The four sides of a quadrilateral flag are measured as 18 cm, 20 cm, 22 cm and 20 cm, each correct to the nearest 1 cm. (a) Find the range of the actual perimeter P of the flag. (b) Find the maximum absolute error and the percentage error of the perimeter calculated from the measurements.
Answer
Standard solution (without a calculator)
- Error of each side: each side is correct to the nearest 1 cm, so its maximum absolute error is 1 ÷ 2 = 0.5 cm.
- Measured perimeter: P₀ = 18 + 20 + 22 + 20 = 80 cm. The four errors can all be in the same direction, so E = 4 × 0.5 = 2 cm.
- Range: adding (18 − 0.5) + (20 − 0.5) + (22 − 0.5) + (20 − 0.5) ≤ P < (18 + 0.5) + (20 + 0.5) + (22 + 0.5) + (20 + 0.5) gives 78 ≤ P < 82 cm.
- Percentage error: 2 ÷ 80 × 100% = 2.5%.
Example 2
The three sides of a triangular frame are measured as 15.2 cm, 19.3 cm and 25.5 cm, each correct to the nearest 0.1 cm. (a) Find the range of the actual perimeter P of the frame. (b) Find the maximum absolute error and the percentage error of the perimeter calculated from the measurements.
Answer
Standard solution (without a calculator)
- Error of each side: correct to the nearest 0.1 cm gives a maximum absolute error of 0.1 ÷ 2 = 0.05 cm per side.
- Measured perimeter: P₀ = 15.2 + 19.3 + 25.5 = 60.0 cm, and E = 3 × 0.05 = 0.15 cm.
- Range: 60 − 0.15 ≤ P < 60 + 0.15, that is 59.85 ≤ P < 60.15 cm.
- Percentage error: 0.15 ÷ 60 × 100% = 0.25%.
Example 3
A pentagonal plot is enclosed by a fence whose five sides are measured as 25 m, 25 m, 30 m, 35 m and 45 m, each correct to the nearest 1 m. (a) Find the range of the actual length P of the fence. (b) Find the maximum absolute error of the measured total length, and its percentage error correct to 3 significant figures.
Answer
Standard solution (without a calculator)
- Error of each side: correct to the nearest 1 m gives a maximum absolute error of 0.5 m per side.
- Measured total: P₀ = 25 + 25 + 30 + 35 + 45 = 160 m, and E = 5 × 0.5 = 2.5 m.
- Range: 160 − 2.5 ≤ P < 160 + 2.5, that is 157.5 ≤ P < 162.5 m.
- Percentage error: 2.5 ÷ 160 × 100% = 1.5625% ≈ 1.56% (3 significant figures).
When to use it
Each side of a polygon is measured correct to the nearest unit u, so each recorded length can be out by up to u/2. Over n sides these errors add up to E = nu/2, so the actual perimeter P satisfies P₀ − E ≤ P < P₀ + E, and the percentage error is 100E/P₀.
Enter the known values
- A: measured perimeter P₀, the sum of the recorded side lengths; B: number of separately measured sides n; X: measuring unit u, the accuracy of every side. Use the same length unit for A and X.
- Type a number at every prompt and press EXE. A unit such as 0.1 can be typed as .1.
Read the results
- Four screens appear in order: L (shown as A−Y), U (A+Y), E (Y) and finally the percentage error 100E/P₀, shown without a % sign. Press EXE after each of the first three.
- A single final −1 means the input was rejected; it is not a bound or an error value.
Question types
- Original practice for HKDSE Mathematics Compulsory Part, estimation and errors in measurement: the range of a perimeter, its maximum absolute error and its percentage error when every side is given correct to the same unit.
Before you start
- Run in COMP from an empty program area (P1 in these examples) with at least 98 bytes free; P1–P4 share 680 bytes. A, B, X and Y are overwritten.
- All n sides must be measured to the same unit u. If the sides have different accuracies, add their half-units yourself instead.
- Conditions: n is a positive integer, u > 0 and nu/2 < P₀ ≤ 10⁸u. Any other input gives only −1.
- Percentage error uses the measured perimeter P₀ as the denominator. The program does not round it; round as the question requires.
- The bounds assume each side can reach its own extremes independently. The program does not check the triangle inequality or whether the extreme lengths can still form the polygon.
- Use at most 10 significant figures. The program switches the display to Norm 2 and leaves it there; change back to Norm 1 afterwards if you need it.
Checking access…