Moving Echo: One Unknown
fx-50FH II · COMP · 147 bytes
Recover initial separation, signed separation rate or echo time from 2d=(c−u)t.
- 147 bytes
- COMP mode
Worked examples
Example 1
Original practice: a fixed acoustic sensor faces an automated panel moving uniformly along its beam. At emission the panel is 105 m away. The sound speed is 350 m/s. The emission and echo traces occur at 0.16 s and 0.66 s. Find the panel's signed separation rate, taking away from the sensor as positive.
Answer
Standard solution (without a calculator)
- The elapsed echo time is the difference between the trace times. For a fixed sensor the outgoing and returning paths are equal.
- t=0.66−0.16=0.5 s; t/2=0.25 s.
- 2d=(c−u)t ⇒ u=c−2d/t=350−2×105/0.5=−70 m/s.
- c(t/2)=350×0.25=87.5 m=105−70×0.25.
- The negative answer means approach. Reflection occurs after 0.25 s, at 87.5 m; the panel has moved 17.5 m towards the sensor.
Example 2
Original practice: an underwater probe moves straight away from a fixed acoustic reflector at 40 m/s while transmitting and receiving. An echo returns 0.75 s after emission. The water is stationary and sound speed is 1480 m/s. Find the separation at emission and at reception.
Answer
Standard solution (without a calculator)
- Let the emission separation be d. During the echo time the probe moves 30 m farther away, so the two sound legs have lengths d and d+30.
- ut=40×0.75=30 m; ct=1480×0.75=1110 m.
- ct=2d+ut ⇒ d=(1110−30)/2=540 m.
- d+ut=540+30=570 m; 540+570=1110 m.
- The initial separation is the solver's answer. Add the probe's displacement to obtain the reception separation; their sum equals the total sound path.
Example 3
Original practice: an acoustic delay unit has a stationary transceiver and a fixed reflector 64 m away. Sound speed is 320 m/s. Neglect pulse duration. Find the echo time and the highest pulse repetition frequency if a new pulse may be emitted as the preceding echo arrives, but never before it.
Answer
Standard solution (without a calculator)
- Enter the known stationary rate u=0. The echo travels to the reflector and back, so its path is 128 m.
- u=0; 2d=2×64=128 m.
- t=2d/(c−u)=128/320=0.4 s.
- Δtₘᵢₙ=t=0.4 s; fₘₐₓ=1/t=2.5 Hz.
- The minimum pulse interval is the echo time. The largest ideal repetition frequency is its reciprocal, a separate calculation after the echo result.
When to use it
Recover initial separation, signed separation rate or echo time from 2d=(c−u)t.
Input order
- Always enter A=c. Of B=d, C=u and D=t, leave exactly one blank with EXE. For a known stationary arrangement, enter u=0 explicitly.
- Enter all known values again on every run. A blank EXE marks the one unknown.
Results
- Success shows 1, then the missing quantity after EXE. Invalid data show only 0. A valid recovered speed may also be 0, but it follows status 1.
Conditions and limits
- Use COMP, Norm 1 and an empty P1 with 147 bytes available. The images use Deg. Assume a stationary medium and constant sound speed in one dimension: either the transceiver is fixed and the reflector moves uniformly, or the reflector is fixed and the transceiver moves uniformly.
- Require c>0, d>0, t>0 and |u|<c. Positive u means increasing separation; negative u means approach. Both ends moving, wind, acceleration and varying sound speed require another model.
- Use the emission-time separation d and elapsed time t=receive time−emit time. Re-enter known data every run. B and D use −1 as the blank preset; C uses the current c. Do not enter these illegal presets as known data.
- For stationary slant paths, d is the one-way path length; depth needs a separate geometric projection. A, B, C, D, M, X and Ans may change. Near |u|=c, subtraction and range limits can reduce accuracy; keep full data and round only the answer.
Checking access…