111Physics · Electrostatics

Coulomb Force: One Unknown

fx-50FH II · COMP · 182 bytes

Find one charge magnitude, separation or electric force, including zero-value cases.

  • 182 bytes
  • COMP mode
01

Worked examples

Example 1

Two isolated dust grains, treated as point charges, carry +8 nC and −5 nC. Their separation is 0.12 m. Using k=9×10⁹ N·m²·C⁻², find the force magnitude and state whether they attract or repel.

Answer
F=2.5×10⁻⁵ N. Opposite signs give attraction.
Standard solution (without a calculator)
  1. Identify the unknown and convert all given values to SI units. |q₁|=8 nC=8×10⁻⁹ C; |q₂|=5 nC=5×10⁻⁹ C; r=0.12 m.
  2. Rearrange the inverse-square law for that one unknown. F=k|q₁q₂|/r².
  3. Substitute the numbers, retaining the positive root for a distance. F=(9×10⁹)×(8×10⁻⁹)×(5×10⁻⁹)/0.12²=2.5×10⁻⁵ N.
  4. Substitute the result back into the original law and check its unit and meaning. (2.5×10⁻⁵)×0.12²=3.6×10⁻⁷=k|q₁q₂|.
  5. Opposite signs give attraction.
Do it on the calculator

Example 2

During an ideal point-charge calibration, a charge of magnitude 1.6 μC is 0.24 m from a second charge. The measured force magnitude is 1.8 N. Find the second charge magnitude in C and μC using k=9×10⁹ N·m²·C⁻². Can its sign be deduced from this force magnitude alone?

Answer
|q₂|=7.2×10⁻⁶ C=7.2 μC. A force magnitude alone does not determine the second charge’s sign.
Standard solution (without a calculator)
  1. Identify the unknown and convert all given values to SI units. |q₁|=1.6 μC=1.6×10⁻⁶ C; r=0.24 m; F=1.8 N.
  2. Rearrange the inverse-square law for that one unknown. |q₂|=Fr²/(k|q₁|).
  3. Substitute the numbers, retaining the positive root for a distance. |q₂|=1.8×0.24²/[(9×10⁹)×(1.6×10⁻⁶)]=7.2×10⁻⁶ C=7.2 μC.
  4. Substitute the result back into the original law and check its unit and meaning. (9×10⁹)×(1.6×10⁻⁶)×(7.2×10⁻⁶)/0.24²=1.8 N.
  5. A force magnitude alone does not determine the second charge’s sign.
Do it on the calculator

Example 3

Two positive point charges, +6 μC and +8 μC, exert a force of magnitude 1.2 N on each other. Find their separation using k=9×10⁹ N·m²·C⁻², and state whether the force is attractive or repulsive.

Answer
r=0.6 m. Equal signs give repulsion.
Standard solution (without a calculator)
  1. Identify the unknown and convert all given values to SI units. |q₁|=6 μC=6×10⁻⁶ C; |q₂|=8 μC=8×10⁻⁶ C; F=1.2 N.
  2. Rearrange the inverse-square law for that one unknown. r=√(k|q₁q₂|/F).
  3. Substitute the numbers, retaining the positive root for a distance. r=√[(9×10⁹)×(6×10⁻⁶)×(8×10⁻⁶)/1.2]=√0.36=0.6 m.
  4. Substitute the result back into the original law and check its unit and meaning. (9×10⁹)×(6×10⁻⁶)×(8×10⁻⁶)/0.6²=1.2 N.
  5. Equal signs give repulsion.
Do it on the calculator
02

When to use it

For point charges in vacuum or approximately air, use F=k|q₁q₂|/r² with k=9×10⁹ N·m²·C⁻².

Input order

  • A = charge magnitude |q₁| (C); B = charge magnitude |q₂| (C); C = separation r (m); D = force magnitude F (N)
  • Enter every known value again on each run.
  • At exactly one prompt, type nothing and press EXE. The preset −1 remains as the unknown marker.
  • A known zero must be entered as 0EXE; a blank EXE is different. Entering −1 manually is indistinguishable from leaving the field blank.

Reading the result

  • The missing charge magnitude (C), separation (m) or force magnitude (N)
  • −1: invalid fields or blank count; −2: no physical solution; −3: more than one possible solution. None is a physical answer.
  • Record the final result, then press AC. Pressing EXE at the completed program starts another run.

Conditions and limits

  • Create and run in COMP, Norm 1; the examples use Deg and empty P1. Angle units do not affect either formula. P1–P4 share 680 bytes.
  • Enter charge and force magnitudes ≥0; known distance must be >0. Use the original charge signs separately to decide attraction or repulsion.
  • The fixed constant cannot be changed for a dielectric medium. This program does not calculate multi-charge resultants, field vectors, potential or charge redistribution.
  • If a known charge is zero, a missing other charge is undetermined when F=0 and impossible when F>0. For an unknown distance, F=0 with nonzero charges has no finite solution; zero charge and zero force leave distance undetermined. Zero charge with F>0 gives no positive distance.
  • Use SI units and round only the final answer. Finite precision, cancellation, intermediate underflow or overflow can prevent a valid result for extreme data.

Sign in to unlock the full programme

Checking access…

The programme code and appendix unlock together.

Checking access…

Sign in to unlock the full programme

Checking access…

The programme code and appendix unlock together.