Successive Percentage Changes and the Original Value
Successive Percentage Changes and the Original Value
Combine up to three successive percentage changes, then find the final value or the original value.
- 88 bytes
- COMP mode
Worked examples
Example 1
A souvenir originally costs $200. The shop raises the price by 25 %, then reduces the new price by 20 %. Which option gives the final price and the total percentage change from the original price?
A. $220; up 10 %
B. $200; no change
C. $210; up 5 %
D. $190; down 5 %
Answer
Standard solution (without a calculator)
- First change: a 25 % rise is a factor of 1 + 25 ÷ 100 = 1.25, so the price becomes 200 × 1.25 = $250.
- Second change: the 20 % cut is based on $250, a factor of 0.8: 250 × 0.8 = $200.
- Combined factor and total change: M = 1.25 × 0.8 = 1, so the total change is (200 − 200) ÷ 200 × 100 % = 0 %. The answer is B; 25 % − 20 % is not the total change.
Example 2
A workshop’s daily output first rises by 20 %, then falls by 10 % of the raised output. It now makes 216 items a day. Find the daily output before the changes.
Answer
Standard solution (without a calculator)
- Set up: let the original output be x. The factors are 1.2 and 0.9, so 216 = x × 1.2 × 0.9 = 1.08x.
- Work back: x = 216 ÷ 1.08 = 200, so the answer is C. Check: 200 × 1.2 = 240 and 240 × 0.9 = 216.
- Direction of the change: from the original to now the factor is still M = 1.08, a total rise of D = 8 %. Even when working backwards, D describes original → final.
Example 3
A tank holds 800 L of water. Round 1 removes 12.5 % of the water then in the tank; round 2 adds water equal to 20 % of the amount at the start of that round; round 3 removes 10 % of the water then in the tank.
(a) Find the combined factor of the three rounds.
(b) Find the total percentage change from the original amount.
(c) Find the final amount of water.
Answer
Standard solution (without a calculator)
- Each round: the factor 1 − 12.5 ÷ 100 = 0.875 leaves 800 × 0.875 = 700 L; × 1.2 gives 840 L; × 0.9 gives 756 L.
- Combined factor: M = 0.875 × 1.2 × 0.9 = 0.945, so the final amount is 94.5 % of the original.
- Total change: D = (0.945 − 1) × 100 = −5.5, a decrease of 5.5 %. Check: (756 − 800) ÷ 800 × 100 % = −5.5 %. Adding −12.5 + 20 − 10 = −2.5 is wrong.
When to use it
DSE percentages questions often change a quantity several times in a row, each change based on the value just before it. The changes multiply, so 25 % up and then 20 % down is not 5 % up. 014 multiplies the factors, shows M and the total change D, then finds the final value from a known original, or the original from a known final value.
What it is for
- One to three successive percentage changes, each based on the value before it
- The final value from the original value, or the original value from the final value
- The total percentage change of a chain (read D, then press AC)
What you enter
- A, B, C: signed percentages — 25 for an increase of 25 %, −20 for a decrease of 20 %; no ÷ 100 and no % key
- With only two stages press EXE at C? without a number; with one stage enter B = 0
- X: the original value if known; if not, press EXE alone and enter the final value at Y?
What it shows
- M, the combined factor (final value ÷ original value)
- D, the total percentage change: 8 means up 8 %, −5.5 means down 5.5 %
- Finally Ans: X × M, or Y ÷ M when the original was unknown
Check before use
- Create the program in COMP in any empty program area (the example uses P1). It sets Norm 1 itself; the angle setting does not matter.
- Enter percentages as signed numbers: up 25 % → 25, down 20 % → −20; do not divide by 100 or press %. A and B must be entered every time (with one stage, B = 0); C is reset to 0 on every run, so it may be left blank.
- M and D each show once and pause; press EXE to go on. The last screen, Ans, is the answer of this run.
- At X? enter a known non-negative original value. If it is unknown, press EXE alone (the program presets X = −1 as the unknown mark) and enter a non-negative final value at Y?. If the original really is 0, enter 0 — do not leave it blank. A, B and Y are never left blank.
- Each change is a percentage of the value just before it, and a decrease can be at most 100 %. Fixed amounts added or removed, weighted percentages of several groups, an unknown percentage inside the chain and more than three stages cannot be keyed in directly.
- When M = 0 the program can work forwards to 0 but cannot recover the original: working backwards gives Math ERROR (if Y = 0 the original is not unique; if Y ≠ 0 the data contradict each other). That is not an original value.
- Full internal precision is kept to the end; do not key the displayed M back in. Tiny changes, or decreases very close to 100 %, are affected by the calculator’s limited precision. With an original value of 0 the final value can be found, but a percentage change from 0 to 0 is undefined.
- After the last Ans the program has finished: AC leaves and EXE runs it again.
Checking access…