Sequential coordinate transformations
Sequential coordinate transformations
Sequential coordinate transformations · (x,y) after each step; final (x,y)
- 149 bytes
- COMP mode
Worked examples
Example 1
Point P(−1,2) is translated 4 units right, rotated 90° anticlockwise about the origin, then reflected in x=1. Which option is its final image?
Answer
Standard solution (without a calculator)
- Translate: Add (4,0) to P(−1,2), obtaining P′=(3,2).
- Rotate: A 90° anticlockwise turn maps (x,y) to (−y,x), so P″=(−2,3).
- Reflect: Across x=1, replace x by 2(1)−x; P‴=(2−(−2),3)=(4,3).
- Choose the image: The three transformations give (−1,2)→(3,2)→(−2,3)→(4,3), which is option B.
Example 2
Point Q(2,5) is rotated 180° about the origin, then reflected in y=−1. Which option is its final image?
Answer
Standard solution (without a calculator)
- Rotate: A 180° turn negates both coordinates, so Q′=(−2,−5).
- Reflect: Across y=−1, keep x and replace y by 2(−1)−y=−2−(−5)=3. Thus Q″=(−2,3).
- Finish after two steps: At the next B? prompt enter 0; the program repeats (−2,3) as the final point.
- Select the result: The final image (−2,3) is option A.
Example 3
Rotate P(5,1) by 90° anticlockwise about C(2,−1). Give a three-step translation–rotation–translation construction and the exact image after each step.
Answer
Standard solution (without a calculator)
- Move the centre to the origin: Translate by (−2,1), so P−C=(5−2,1−(−1))=(3,2).
- Rotate the translated point: A 90° anticlockwise turn gives (3,2)→(−2,3).
- Move back: Translate by C=(2,−1), giving (−2+2,3−1)=(0,2).
- Conclude: The final image is Q=C+R₉₀(P−C)=(0,2); the three displayed pairs are (3,2),(−2,3),(0,2).
When to use it
A translation, rotation or reflection changes the current point before the next operation. The order matters: apply each rule to the preceding image, not to the original point.
Enter a starting point and operations
- Enter X?=starting x and Y?=starting y. For each step, B? is 1 for translation, 2 for rotation about the origin, 3 for reflection in x=p, or 4 for reflection in y=p.
- For B=1, enter C?=horizontal shift Δx and A?=vertical shift Δy, including zeros. For B=2, enter C?=angle θ in degrees, positive anticlockwise. For B=3 or 4, enter C?=the mirror-line constant p.
Read each image
- Each completed step displays x then y. Press EXE between results; the final point is displayed once more after the operations.
- To use only one or two operations, enter B?=0 at the next operation prompt. After three operations, the program finishes without another selection.
Question types
- Original HKDSE Mathematics Compulsory Part practice: find a composite image, reverse a transformation, or rotate about a non-origin centre by translating to and from the origin.
Before you start
- Use COMP / Deg / Norm 1 and an empty P1 with at least 149 bytes; P1–P4 share 680 bytes. X,Y,B,C,A,D,M and Ans may be overwritten; save stored values first.
- Only operation codes 0–4 are accepted; 0 ends the sequence before the next step and asks for no parameter. An invalid code deliberately raises Math ERROR.
- Rotations use degrees about the origin. A rotation about (h,k) needs three steps: translate by (−h,−k), rotate, then translate by (h,k). Reversing the order changes the image in general.
- Reflection code 3 is in the vertical line x=p; code 4 is in the horizontal line y=p. For the x-axis choose code 4,p=0; for the y-axis choose code 3,p=0.
- Enter each required value explicitly, including a zero shift. Blank EXE can retain a value from a prior run; the program does not solve for missing operation parameters.
- The LCD rounds to about ten significant digits. Extreme coordinates, cancellation and trigonometric rounding near special angles may affect accuracy; retain exact coordinates and give a written reason where required.
Checking access…