Rectangle Area Bounds
Rectangle Area Bounds
Rectangle Area Bounds
- 87 bytes
- COMP mode
Worked examples
Example 1
Original DSE-style example. A rectangular card has measured sides 9 cm and 14 cm, each rounded to the nearest 1 cm. Find the range of its actual area S cm².
Answer
Standard solution (without a calculator)
- The area increases with each positive side. Set up the equation: 8.5≤a<9.5; 13.5≤b<14.5; h=0.5.
- Substitute and calculate: L=8.5×13.5=114.75; U=9.5×14.5=137.75.
- Write the answer: 114.75≤S<137.75 (cm²).
Both sides must have positive lower limits. Different rounding precisions need a different model.
Example 2
Original DSE-style example. A rectangular glass panel has measured sides 2.3 m and 4.8 m, each rounded to the nearest 0.1 m. Find the range of its actual area S m².
Answer
Standard solution (without a calculator)
- The area increases with each positive side. Set up the equation: 2.25≤a<2.35; 4.75≤b<4.85; h=0.05.
- Substitute and calculate: L=2.25×4.75=10.6875; U=2.35×4.85=11.3975.
- Write the answer: 10.6875≤S<11.3975 (m²).
Both sides must have positive lower limits. Different rounding precisions need a different model.
Example 3
Original DSE-style example. A rectangular tray has measured sides 1.24 m and 2.36 m, each rounded to two decimal places. Find the range of its actual base area S m².
Answer
Standard solution (without a calculator)
- The area increases with each positive side. Set up the equation: 1.235≤a<1.245; 2.355≤b<2.365; h=0.005.
- Substitute and calculate: L=1.235×2.355=2.908425; U=1.245×2.365=2.944425.
- Write the answer: 2.908425≤S<2.944425 (m²).
Both sides must have positive lower limits. Different rounding precisions need a different model.
When to use it
For sides a and b rounded to the same full unit u, enter u, a, b. With h=u/2, the area satisfies (a−h)(b−h)≤S<(a+h)(b+h).
Purpose
- The area increases with each positive side.
Input
- For sides a and b rounded to the same full unit u, enter u, a, b. With h=u/2, the area satisfies (a−h)(b−h)≤S<(a+h)(b+h).
Output
- lower bound included → upper bound excluded
- Both sides must have positive lower limits. Different rounding precisions need a different model.
Check before use
- Use the same physical unit and rounding unit for both sides; u>0 and a,b>u/2. Require a+b≤10^8u. Rejected geometry or scale gives −1. Only positive rectangle products are supported, with a closed lower and open upper bound.
- Use COMP and an empty program area. Enter every required value explicitly; a blank EXE keeps the old value and does not mean zero.
- Use (−) for a negative number and − for subtraction. While Disp is lit, press EXE to continue; the final screen ends the run. AC leaves safely; another EXE starts again.
- Both side intervals must have positive lower limits and the same rounding precision. Different precisions require a different model.
Checking access…