043Mathematics · Variations

Percentage Change in Joint Variation

Percentage Change in Joint Variation

Percentage change of z when x and y change, for z = k × x^p × y^q, from the powers and the signed percentage changes.

  • 43 bytes
  • COMP mode
01

Worked examples

Example 1

The output efficiency E of a sensor is directly proportional to the square root of the input power P and inversely proportional to the running time T. If P decreases by 19% and T increases by 20%, what is the percentage change in E? The options give the signed percentage change (+ increase, − decrease).

  1. A.+25 %
  2. B.−25 %
  3. C.−30 %
  4. D.+30 %
Answer
B −25 %, a decrease of 25%
Standard solution (without a calculator)
  1. Set up the relation: let E = k√P ÷ T, where k is a constant.
  2. Turn the percentages into multipliers: the multiplier of P is 1 − 0.19 = 0.81 and that of T is 1 + 0.20 = 1.20.
  3. Efficiency multiplier: R = √0.81 ÷ 1.20 = 0.9 ÷ 1.2 = 0.75.
  4. Convert to a percentage change: (R − 1) × 100% = (0.75 − 1) × 100% = −25%, so the efficiency decreases by 25%. The answer is B.
Do it on the calculator

Example 2

The signal quality S of a device is directly proportional to the square of the transmitted amplitude U and inversely proportional to the square root of the background noise N. If U decreases by 25% and N increases by 44%, find the percentage change in S. The options give the signed percentage change (+ increase, − decrease).

  1. A.−46.875 %
  2. B.+53.125 %
  3. C.−53.125 %
  4. D.−56.25 %
Answer
C −53.125 %
Standard solution (without a calculator)
  1. Set up the relation: S = kU² ÷ √N, where k is constant.
  2. Turn the quantities into multipliers: the multiplier of U is 0.75 and that of N is 1.44.
  3. Signal-quality multiplier: R = 0.75² ÷ √1.44 = 0.5625 ÷ 1.2 = 0.46875.
  4. Percentage change: (0.46875 − 1) × 100% = −53.125%, so S decreases by 53.125%. The answer is C.
Do it on the calculator

Example 3

In an ideal flow model, the flow rate Q is directly proportional to the square of the pipe’s inner diameter d and inversely proportional to the fluid viscosity η. If d increases by 10% and η decreases by 12%, find the multiplier of Q (new value to old value) and its percentage change, and state whether the flow rate increases or decreases.
(a) Express the original joint variation using k.
(b) Calculate the multiplier of the flow rate.
(c) Find the percentage change of the flow rate and decide whether it increases or decreases.

Answer
(a) Q = kd² ÷ η (b) 1.375 times (c) an increase of 37.5%
Standard solution (without a calculator)
  1. Joint variation (a): Q = kd² ÷ η, where k is a constant.
  2. Turn the changes into multipliers: d increases by 10%, so the new d is 1.10 times the old; η decreases by 12%, so the new η is 0.88 times the old.
  3. Flow multiplier (b): R = 1.10² ÷ 0.88 = 1.21 ÷ 0.88 = 1.375.
  4. Percentage change (c): (1.375 − 1) × 100% = 37.5%. The plus sign means the flow rate increases by 37.5%.
Do it on the calculator
02

When to use it

DSE variation questions often say that z varies directly as a power of x and inversely as a power of y, give percentage changes of x and y, and ask for the percentage change of z. The constant k and the original values cancel in the new-to-old ratio R = (1 + X ÷ 100)^p × (1 + Y ÷ 100)^q, so neither is needed. 043 takes the powers p and q (A and B) and the signed percentage changes of x and y (X and Y), first shows R, and after EXE shows the signed percentage change of z: negative means a decrease and positive an increase.

What it is for

  • z = k × x^p × y^q: z varies directly or inversely as powers of x and y
  • Percentage change of z from the percentage changes of x and y, without k or the original x and y
  • Questions that ask for the multiplier as well as the percentage change

What you enter

  • A, B: the powers p and q as in the question (x² → 2, √x → 0.5, inverse y → −1, inverse √y → −0.5)
  • X, Y: the signed percentage changes as numbers (+20 % → 20, −40 % → −40)
  • All four values every time, in the order A, B, X, Y

What it shows

  • First the multiplier R (new ÷ old), then press EXE
  • Then the signed percentage change of z, 100(R − 1): positive means an increase, negative a decrease
  • The final screen is the answer; press AC to leave

Check before use

  • Use COMP mode and build the program in P1. Set the angle unit to Deg; there is no trigonometry, so it does not affect the answer. The program does not set Norm itself, so check that Norm 1 is on before you start.
  • Enter the powers as in the mathematical form of the question: varies as x² → p = 2, as √x → p = 0.5, inversely as y → q = −1, inversely as √y → q = −0.5. A negative power already contains the inverse, so do not change the sign of any percentage.
  • Enter the percentage as its number: an increase of 20 % is 20 and a decrease of 40 % is −40. The program has the % operation built in, so do not enter 0.2 or 0.4 in place of 20 or 40.
  • It applies when the original x, y and z are non-zero and the new and old values stay positive. So both signed percentage changes must be strictly greater than −100. To save space the program does not check every domain, so keep to this limit.
  • If a question asks for x from the percentage changes of z and y, first rewrite the target as a joint variation of x with the other two known quantities and enter the rewritten p and q; the original formula is not entered directly.
  • Enter all four values A, B, X and Y on every run; do not press EXE at a prompt to reuse an old value. No memory needs clearing before a new run, and the program does not rely on an earlier Ans.
  • Answers have the calculator’s floating-point precision. When a percentage change is very close to 0 %, or the multiplier is very large or very small, check the significant figures and approximation error yourself. A base of 0, a negative base or a fractional power may fall outside the allowed real range.

Sign in to unlock the full programme

Checking access…

The programme code and appendix unlock together.

Checking access…

Sign in to unlock the full programme

Checking access…

The programme code and appendix unlock together.